MIMAKI GP-1810 Manuel d'instructions télécharger pdf (Page 38)

- 2.6 -

Station cover

Opening/closing the station cover

•Keep the station cover closed during printing operation. Opening the station

cover during printing interrupts image printing and disables continuous

processing.

If you open the station cover during printing, the carriage will stop for safety, resulting in abortion of

printing. In this case, re-start the machine and computer following the procedure described below.

STEPS:

1. When opening the station cover during print-

ing, the message shown on the right will be

displayed.

Stop the printing.

2. Stop the data transmission from the computer.

3. Close the station cover.

4. Press the [ENTER] key.

5. The carriage will start to move.

The carriage will carry out a series of performance same as

that taken after turning on the power to the machine.

( page 2.3)

Check Stop SW or

Station Cover

PRESS < ENT > KEY

Please Wait

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 151 152

Pas de commentaire

MIMAKI GP-1810 Manuel d'instructions Page 38