MIMAKI JV5-320S Spécifications télécharger pdf (Page 23)

2-5

Print image data

For operations and setting before printing, see “Chapter 3 Printing” of JV5-320S Operation Manual.

Print on front side

1 Set media.

For the setting procedure in detail, see JV5-320S Operation Manual.

2 Check the heater temperature.

Check CONSTANT lamp on the heater panel is lighting in green.

3 Press [REMOTE] key.

Printes switches to REMOTE mode.

You can check the selected type (print condition).

4 Start Raster Link Pro III, and select data to print.

Double-click the data to open.

If the data is not in the list, click [File] - [Open] and select the file.

 Before printing on roll media, check the media is not slack on the back of the

printer.

If bowed, rewind the roll media manually to take up the slack. With a slack, it

may cause defective printing.

R. ∗ > [JV5-01]

∗∗.∗∗ mm

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 35 36

Pas de commentaire

MIMAKI JV5-320S Spécifications Page 23