MIMAKI JV5-320S Spécifications télécharger pdf (Page 27)

2-9

Print image data

Print on back side

STEPS:

1 Activate back side printing.

1. Press [FUNCTION] key, select [MACHINE SETUP], then press [ENTER] key.

2. Press [

] [] key, select [DoubleSide Mode], then press [ENTER] key.

3. Press [

] [] key, select [DoubleSide Mode], then press [ENTER] key.

4. Press [

] [] key, select [ON], then press [ENTER] key.

5. Press [END] key to return to the upper menu.

 Dry the media well.

When front side is printed, dry the printed media well (Drying time is about 1

day as a guide).

If printing on back side before drying well, the media may not be properly fed.

 When printing on back side, do not use the heavy-duty take-up device.

If the heavy-duty take-up device is used, feeding direction is not correctly posi-

tioned.

To take-up media during printing on back side, use the front roll holder.

 When printing on back side, set [Print Of BackSide] to ON.

If OFF is set, it cannot print with the specified size.

(When it is OFF, the printer starts printing by Raster Link Pro III, then JV5-320S

displays parameter error, and it prints the rest by fixed mode (720x720, 8pass).)

FUNCTION

MACHINE SETUP <ENT>

MACHINE SETUP

DoubleSide Mode :ent

DoubleSide Mode

Print Of BackSide :ent

DoubleSide Mode

Print Of BackSide

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 35 36

Pas de commentaire

MIMAKI JV5-320S Spécifications Page 27