MIMAKI JV5-320S Spécifications Page 85
- Page / 130
- Table des matières
- MARQUE LIVRES
Noté. / 5. Basé sur avis des utilisateurs
6-25
Invoking NCU functions
NG ACTION [AFTERtheDRAWend] (*1)
Set the operation of the printer after completion of printing of one file in case a preset number of missing
nozzles or more are detected and thus NG judgment is made. (*2)
The detail setting menu for cleaning is displayed by pressing the [FUNCTION] key with [CLEAN-
ING&CONT] or [CLEANING&STOP] selected.
CLEANING TYPE [CLEANING&CONT], [CLEANING&STOP]
Set a type of cleaning.
Available setting values: [NORMAL, SOFT, HARD] ( Default: NORMAL)
RETRY COUNT [CLEANING&STOP]
Set the number of times cleaning is to be retried.
Available setting values: [0 ~ 3] (Default: 3)
With RETRY COUNT set to 3, the printer will perform cleaning operation a maximum of four times (as
long as clogged nozzles are not corrected) including the first cleaning operation.
Turn off the external heater when cleaning operation by NG ACTION [DURING THE DRAW] or NG
ACTION [AFTERtheDRAWend] is to be performed. (*2)
NG JUDGEMENT (*1)
Set the number of missing nozzles for judging the nozzle check NG .(*2)
CLOGG NZL/color
Set the number of missing nozzles per row for judging the nozzle check NG . (*2)
Available setting values: [1 ~ 180] (Default: 10)
CLOGG NZL/ALL
Set the total number of missing nozzles for judging the nozzle check NG . (*2)
Available setting values: [1 ~ 180] (Default: 10)
COND.INDICATION
Displays the status of the NCU.
Pressing [FUNCTION] key, it displays every error that has occurred in the NCU and between NCU
↔
Main Unit.
Using the [
] or [
] key, the errors can be displayed one by one in the order of occurrence.
NG (*1): Bad nozzle condition.
NG (*2): One or more bad nozzles have been located on print head.
CONTINUE The printer keeps on printing. (Default)
CLEANING&CONT
Corrects clogged nozzles by cleaning.
Whether the printer succeeds or fails in cleaning, it restarts printing.
CLEANING&STOP
Corrects clogged nozzles by cleaning.
If the printer fails in cleaning, it does not restart printing.
STOP Stops printing.
NG (*1): Bad nozzle condition.
NG (*2): One or more bad nozzles have been located on print head.
NCU works at present. NCU is available.
NCU is separated due to the
ERROR.
There is a problem with NCU.
Operation can be resumed after turning off the nozzle missing detection function.
- OPERATION MANUAL 1
- Foreword 2
- TABLE OF CONTENTS 3
- CHAPTER 4 Daily Care 4
- CHAPTER 5 In Case of Trouble 4
- CHAPTER 1 7
- Safety Precautions 7
- Basic specifications 9
- 1 Safety Precautions 10
- Specifications for ink 11
- CHAPTER 2 13
- Before Use 13
- Configurations and Functions 14
- BL Light Blue 16
- Operation Panel 17
- 2 Press the [FUNCTION] key 18
- Outline of menu hierarchy 20
- Direct keys 22
- SET UP functions 23
- 2 Before Use 24
- MAINTENANCE functions 25
- MACHINE SET functions 28
- NCU functions 30
- CHAPTER 3 31
- Printing 31
- Adjusting the head gap 32
- Attach the platen sheet metal 34
- Remove the platen sheet metal 35
- 3 Printing 36
- Entry of right edge 41
- [ < ] or [ > ] key hit 41
- When the media left 41
- OK The media has wrinkles 42
- Adjust it 42
- [6]Set the media press 43
- For transfer paper 44
- Input of MediaLength 46
- MEDIA LENGTH = 50 m 46
- Clamp fixing spacer 47
- Media edge surface 47
- Effective Plotting Area 48
- Establishing the Origin 49
- Other notes 50
- Cut it using scissors etc 51
- Setting value : 52
- OFF, WEAK 52
- Little WEAK 52
- STANDARD, STRONG 52
- CHAPTER 4 53
- Daily Care 53
- Routine Maintenance 54
- 1 Pull the filter Assy out 55
- L. *> [JV5-01] 56
- ST.MAINTENANCE 56
- CARRIAGE OUT <ENT> 56
- COMPLETED <ent> 57
- * Being Initialized * 57
- PLEASE WAIT 57
- 4 Daily Maintenance 58
- CHAPTER 5 59
- In Case of Trouble 59
- Warning errors newly added 60
- Error messages newly added 60
- CHAPTER 6 61
- Operation for Functions 61
- Invoking SET UP functions 62
- Page in this 63
- (See P.6-28) 64
- INK LAYERS 66
- DRYING TIME 66
- PRE-FEED 67
- COLOR PATTERN 68
- DRYNESS FAN 68
- PRIORITY 69
- AUTO CLEANING 69
- Maintenance while printing 69
- (See P.3-2) 70
- List of functions 71
- 2 Press the [ST.MAINT] key 72
- [MEDIA RESIDUAL] 73
- L. ∗ > [JV5-01] 76
- FUNCTION 76
- MACHINE SETUP <ENT> 76
- REAR MIST FAN 77
- Feeding / TakeUP 77
- DRYNESS FEED 78
- CONFIRM. FEED 78
- PRE-FEED METHOD 78
- HEATER SETUP 78
- TIME SET 78
- UNIT SETUP 79
- STAMP SETUP 79
- CART. PRIORITY 80
- Test Draw Arrange 80
- MACHINE NAME 80
- Ambient temperature 80
- Serial&DealerNo 82
- NCU <ENT> 83
- Outline of the NCU functions 84
- NG JUDGEMENT (*1) 85
- COND.INDICATION 85
- DISPLAY setting 86
- Applied settings of functions 87
- Detailed settings of heaters 88
- Input range: 89
- PRE [OFF, 20 - 60] ° C 89
- POST [OFF, 20 - 70] ° C 89
- How to operate function menus 90
- Change is 91
- Functions related to ink 92
- JV5-320DS 94
- Function Flowchart [BOOT] 95
- 6 Operation for Functions 100
- CLtypeSetWithFUNCkey 109
- D202100-13-31102014 128
- Printed in Japan 130
Produits connexes et manuels pour Imprimer et scanner MIMAKI JV5-320S
(166 pages)© 2020, manymanuals.fr. Tous droits réservés | 0.815 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels