MIMAKI JV3-130SPII Spécifications télécharger pdf (Page 46)

- 2.12 -

10. Push the clamp lever at the back of the device.

The clamp lever on the front face is lowered to hold the

media. (for temporary setting)

When the roll holder is attached at the top or bottom position,

it is necessary to use the lock pin.

page 2.15

11. Open the front cover and pull up the clamp

lever at the front of the device.

12. Pull out the roll media gently and then stop

pulling when locked lightly.

13. Pull the roll media from side to side evenly

and push down the clamp lever.

When the roll holder is attached at the top or bottom position,

it is necessary to use the lock pin.

page 2.15

• When using a leaf media, set it so that it does

not run off to the right of the pinch roller at the

right end.

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 141 142

Pas de commentaire

MIMAKI JV3-130SPII Spécifications Page 46