MIMAKI JV3-130SPII Spécifications télécharger pdf (Page 77)

- 4.3 -

1. Select the LOCAL mode.

Ascertain first that the device does not perform printing under the REMOTE mode, then

press the [REMOTE] key to enter the LOCAL mode.

2. Select the FUNCTION mode.

Press the [FUNCTION] key, and the device will enter the FUNCTION mode.

The FUNCTION mode is divided into two: the setup function and maintenance function.

Select either function.

3. Select a type.

There are four types. The FUNCTION mode can be set for each type depending on the

media type used.

4. Select the Function.

Press the Jog keys [ ] or [ ] to select the function.

5. Enter the Function selected.

Press the [ENTER] key.

6. Select a parameter.

Press the Jog keys [ ] or [ ] to select a parameter.

7. Enter the specified value.

Press the [ENTER] key.

8. Restore the LOCAL mode.

Press the [END] key several time to restore the LOCAL mode.

1 2 ... 72 73 74 75 76 77 78 79 80 81 82 ... 141 142

Pas de commentaire

MIMAKI JV3-130SPII Spécifications Page 77