MIMAKI JV5-320S Spécifications télécharger pdf (Page 209)

5-17

Troubles for which error messages are displayed

Expiration:1MONTH

- - - - - - - - - - - - - - - -

The expiration date of an ink cartridge

has passed (one month has passed after

the specified expiration date).

The red LED blinks. Replace the car-

tridge generating the warning with a

new one.

The cartridge may be used until two

months pass after the specified expira-

tion date.

Expiration:2MONTH

- - - - - - - - - - - - - - - -

The expiration date of an ink cartridge

has passed (two months have passed

after the specified expiration date).

Replace the cartridge generating the

warning with a new one.

INK REMAIN ZERO

- - - - - - - - - - - - - - - -

Remaining amount of ink in an ink car-

tridge is zero.

Replace the cartridge generating the

warning with a new one.

!WasteTANK

FULL/NONE

The waste ink tank is full or has not

been installed.

Check the waste ink tank.(See 4-40)

!NearFULL WASTE TANK

The waste ink tank is nearly full. Replace the waste ink tank with a new

one. (See 4-40)

!Wash Liquid END

The cleaning liquid cartridge is empty. Replace the cleaning solution cartridge

with a new one.

!WashLiquidCart.NONE

The cleaning liquid cartridge has not

been installed.

Install the cleaning solution cartridge.

!WRONG WASH CART.

There is trouble with cleaning liquid

cartridge.

Check the cleaning solution cartridge.

!Flush.BOX CLEANING

The time for cleaning the flushing box. Perform the cleaning operation of the

flushing box. (See 4-42)

!NearExcg. Flush.BOX

Time to replace the flushing box will

soon come.

When replacement time comes, it

becomes local mode every time of

printing a data and stops the operation.

Contact your local distributor to call

for service.

!Flush.BOX EXCHANGE

Time to replace the flushing box has

come.

If keeping using without replacing, you

cannot print. Contact your local dis-

tributor to call for service.

!NCU is separated.

There is a problem with the NCU.

It appears when any trouble detected

turning the power on, even when

[NCU]-[NOZZLE CHECK] is off.)

On the [NCU]-[COND.INDICA-

TION] display, check the current error

in the NCU.

Operation can be resumed after turning

off the nozzle missing detection func-

tion.

!Take-UP CoverOPEN

The cover of heavy-duty take-up

device is detected open.

Check the cover of heavy-duty take-up

device.

If the message appears after closing the

cover, contact your local distributor to

call for service.

!Take-UP LimitDETECT

The limit sensor of heavy-duty take-up

device is detected.

Lower the tension-bar of take-up side.

If the message appears after lowering,

contact your local distributor to call for

service.

!Take-UP WRONG

There is a trouble with the take-up of

heavy-duty take-up device.

Check the media is correctly set on

heavy-duty take-up device.

Or, check the take-up media roll is not

running idle.

Warning message Cause Remedy

1 2 ... 204 205 206 207 208 209 210 211 212 213 214 ... 297 298

Commentaires sur ces manuels

Pas de commentaire

MIMAKI JV5-320S Spécifications Page 209

Commentaires sur ces manuels

Produits connexes et manuels pour Imprimer et scanner MIMAKI JV5-320S