MIMAKI JV5-320S Spécifications Page 28
- Page / 130
- Table des matières
- MARQUE LIVRES
Noté. / 5. Basé sur avis des utilisateurs
2 Before Use
2-16
MACHINE SET functions
Function name Sub function Setting value Function
REAR MIST FAN
(Refer to P.6-17 in
this manual.)
STOP TIMER CONTINUE, 0 ~ 240mm Sets the operation of the mist fan in
the rear of the machine.
[STOP TIMER] sets the time until
the fan stops after drawing is com-
pleted.
[RENEW] switches the current
operation status of the fan.
RENEW ON, OFF
Feeding / TakeUP
(Refer to P.6-17 in
this manual.)
UNIT SELECT FEEDING ON, OFF Set whether to use or not to use
heavy-duty feeding / take-up device.
TAKE-UP ON, OFF
Tension Bar-POS. HIGH, LOW
DRYNESS FEED (Refer to P.6-18 in this manual.) ON, OFF Change the feed operation after
printing.
CONFIRM. FEED
(Refer to P.6-18 in
this manual.)
ON
Press [FUNC-
TION] key to set
items on the right.
BACK FEED ON, OFF Set whether or not to perform feed-
ing the media after test printing for
checking of the printing result.
OFF
PRE-FEED
METHOD
(Refer to P.6-18 in
this manual.)
FORE (**mm)
Press [FUNC-
TION] key to set
items on the right.
LENGTH 10mm to 1000mm Switches the pre-feed operation.
FORE&BACK
HEATER SETUP (Refer to P.6-18 in this manual.) STD, set -5°C, set -10°C, set -15°C,
set -20°C
Change the temperature range of the
post-heater that determines whether
the temperature is reached.
TIME SET (Refer to P.6-18 in this manual.) ON, OFF Set the date and time on the printer.
UNIT SETUP
(Refer to P.6-19 in
this manual.)
TEMP. °C or °F Change the units of temperature,
length and area to be used with the
printer.
LENGTH mm or inch
STAMP SETUP (Refer to P.6-19 in this manual.) ON, OFF Make settings for outputting the date
and time and printing conditions
after printing.
CART. PRIORITY (Refer to P.6-20 in this manual.) INK LEVEL, EXP.DATA You can select the cartridge status to
use first with the double cartridge
function of ink supply.
Test Draw Arrange (Refer to P.6-20 in this manual.) FEED DIR., SCAN DIR. You can set the placement direction
of the drawn test pattern when per-
forming test drawing repeatedly.
MACHINE NAME (Refer to P.6-20 in this manual.) 01 to 99 When the printer is connected
through the USB 2.0 interface to a
system to which two or more
machines are connected, set the
identifier of the printer to have the
system recognize it.
ENV. TEMP (Refer to P.6-20 in this manual.) Not wait ARR., Wait arrival Set the operation when drawing was
tried to start with the temperature of
the place where this machine has
been installed being outside the
range of usable temperature.
- OPERATION MANUAL 1
- Foreword 2
- TABLE OF CONTENTS 3
- CHAPTER 4 Daily Care 4
- CHAPTER 5 In Case of Trouble 4
- CHAPTER 1 7
- Safety Precautions 7
- Basic specifications 9
- 1 Safety Precautions 10
- Specifications for ink 11
- CHAPTER 2 13
- Before Use 13
- Configurations and Functions 14
- BL Light Blue 16
- Operation Panel 17
- 2 Press the [FUNCTION] key 18
- Outline of menu hierarchy 20
- Direct keys 22
- SET UP functions 23
- 2 Before Use 24
- MAINTENANCE functions 25
- MACHINE SET functions 28
- NCU functions 30
- CHAPTER 3 31
- Printing 31
- Adjusting the head gap 32
- Attach the platen sheet metal 34
- Remove the platen sheet metal 35
- 3 Printing 36
- Entry of right edge 41
- [ < ] or [ > ] key hit 41
- When the media left 41
- OK The media has wrinkles 42
- Adjust it 42
- [6]Set the media press 43
- For transfer paper 44
- Input of MediaLength 46
- MEDIA LENGTH = 50 m 46
- Clamp fixing spacer 47
- Media edge surface 47
- Effective Plotting Area 48
- Establishing the Origin 49
- Other notes 50
- Cut it using scissors etc 51
- Setting value : 52
- OFF, WEAK 52
- Little WEAK 52
- STANDARD, STRONG 52
- CHAPTER 4 53
- Daily Care 53
- Routine Maintenance 54
- 1 Pull the filter Assy out 55
- L. *> [JV5-01] 56
- ST.MAINTENANCE 56
- CARRIAGE OUT <ENT> 56
- COMPLETED <ent> 57
- * Being Initialized * 57
- PLEASE WAIT 57
- 4 Daily Maintenance 58
- CHAPTER 5 59
- In Case of Trouble 59
- Warning errors newly added 60
- Error messages newly added 60
- CHAPTER 6 61
- Operation for Functions 61
- Invoking SET UP functions 62
- Page in this 63
- (See P.6-28) 64
- INK LAYERS 66
- DRYING TIME 66
- PRE-FEED 67
- COLOR PATTERN 68
- DRYNESS FAN 68
- PRIORITY 69
- AUTO CLEANING 69
- Maintenance while printing 69
- (See P.3-2) 70
- List of functions 71
- 2 Press the [ST.MAINT] key 72
- [MEDIA RESIDUAL] 73
- L. ∗ > [JV5-01] 76
- FUNCTION 76
- MACHINE SETUP <ENT> 76
- REAR MIST FAN 77
- Feeding / TakeUP 77
- DRYNESS FEED 78
- CONFIRM. FEED 78
- PRE-FEED METHOD 78
- HEATER SETUP 78
- TIME SET 78
- UNIT SETUP 79
- STAMP SETUP 79
- CART. PRIORITY 80
- Test Draw Arrange 80
- MACHINE NAME 80
- Ambient temperature 80
- Serial&DealerNo 82
- NCU <ENT> 83
- Outline of the NCU functions 84
- NG JUDGEMENT (*1) 85
- COND.INDICATION 85
- DISPLAY setting 86
- Applied settings of functions 87
- Detailed settings of heaters 88
- Input range: 89
- PRE [OFF, 20 - 60] ° C 89
- POST [OFF, 20 - 70] ° C 89
- How to operate function menus 90
- Change is 91
- Functions related to ink 92
- JV5-320DS 94
- Function Flowchart [BOOT] 95
- 6 Operation for Functions 100
- CLtypeSetWithFUNCkey 109
- D202100-13-31102014 128
- Printed in Japan 130
Produits connexes et manuels pour Imprimer et scanner MIMAKI JV5-320S
(166 pages)© 2020, manymanuals.fr. Tous droits réservés | 0.939 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels