MIMAKI JV5-320S Spécifications télécharger pdf (Page 63)

6-3

Invoking SET UP functions

Settings of the setup functions

The operation described below on the operation panel is required to execute the setup functions.

STEPS:

1 Make sure that the printer is in LOCAL mode, and then select [SET UP] using the

[FUNCTION] key and press the [ENTER] key.

If it is in REMOTE mode, press the [REMOTE] key.

2 Select an appropriate one of Type 1 to Type 4 by means of [] or [], and press the

[ENTER] key.

Set the printing conditions.

3 Select a setup function and make setting.

DRYNESS FAN

Sets the strength of the fan to dehydrate ink broke through to the rear sur-

face.

P.6-8

PRIORITY Sets the priority of settings (host / panel) P.6-9

AUTO CLEANING Cleans the print heads automatically every completion of printing P.6-9

Print. MAINTE Automatically cleans or wipes the heads regularly while printing. P.6-9

HEAD GAP Sets the head gap (height from the media to the nozzle plane of the heads). P.6-10

MEDIA DETECT Sets the media width detection method (MANUAL/AUTO). P.6-10

SETUP RESET

Resets the setting values to the default values P.6-10

*1. Each item excluding [SETUP RESET] can be registered on the type.

Name Function

Page in this

manual

L. ∗ > [JV5-01]

width : ∗∗∗∗ mm

FUNCTION

SET UP <ENT>

SET UP

SELECT : TYPE 1

SET UP

SELECT : TYPE 2

1 2 ... 58 59 60 61 62 63 64 65 66 67 68 ... 129 130

Pas de commentaire

MIMAKI JV5-320S Spécifications Page 63